Added a 'Frontend output modes' section explaining plain text (default),
--debug (annotated trace), and --raw (hex), with launch.sh examples for
each.
Generated by Clanker
Adopt the confirmed-working reference's pin assignment so the module runs
on that proven wiring: DATA=BCM2 (pin 3), CLK=BCM3 (pin 5), ATN=BCM4
(pin 7). RESET is kept and relocated to BCM17 (pin 11), the pin freed by
moving CLK. All five GPIOs stay in bank 0, so the direct-register hot
path and ATN IRQ are unchanged -- only the IEC_GPIO_* defines, the
device-tree overlay, and the docs/self-test move.
DATA/CLK now sit on the ARM I2C pins (GPIO2/3) with the SoC's fixed
~1.8k pull-ups; keep dtparam=i2c_arm off. The bare-board self-test
expectation changes from 0x15 to 0x0b accordingly.
Generated by Clanker
Document the process for setting up and running the Python frontend on
a Raspberry Pi using release packages. Include details on wiring
self-tests, module selection, and using `launch.sh` for streamlined
execution. Update kernel README to cross-reference top-level changes.
Expand documentation on selftest.sh behavior, module matching, and kernel compatibility. Clarify the auto-selection process based on `vermagic` and provide examples to guide users through fallback handling and manual overrides.
Replace legacy gpio_to_desc() with GPIO descriptor resolution by chip label
and hardware number, ensuring compatibility with kernels using non-zero
gpiochip bases. Added `selftest.sh` for non-persistent module testing, which
performs a hardware self-test and verifies wiring before connecting the real
bus. Included a detailed README.md documenting the self-test process.
