small LOAD cleanup

This commit is contained in:
FeralChild64 committed 2019-10-28 21:27:26 +01:00
1 parent 05253c3e92
commit 3d9e713f07
20 files changed
+98 -84

No files matched your search

+15 -6
View File
@@ -5,18 +5,27 @@
// Preserves .A, .X and .Y
//
iec_check_devnum:
// 0, 1, 2, or 3 are illegal - reserved for non-IEC devices on Commodore
cmp #$04
iec_check_devnum_lvs: // for load/verify/save
cmp #$08 // below 8 are illegal for load/save
bcs !+
// FALLTROUGH
iec_check_devnum_oc: // for open/close
cmp #$04 // below 4 are illegal, reserved for non-IEC devices on Commodore
bcs !+
// FALLTROUGH
iec_check_devnum_failed:
sec // indicate non-IEC device
rts
!:
// 31 and above are illegal too, due to IEC command encoding scheme,
// see https://www.pagetable.com/?p=1031
cmp #$1F
bcs iec_check_devnum_failed
// Carry is clear here - indicates IEC device
cmp #$1F // sets carry for 31 or above
rts
+1 -4
View File
@@ -17,7 +17,7 @@ LISTEN:
jsr iec_tx_flush
// Check whether device number is correct
jsr iec_check_devnum
jsr iec_check_devnum_oc
bcc !+
jmp kernalerror_DEVICE_NOT_FOUND
!:
@@ -25,6 +25,3 @@ LISTEN:
ora #$20
jmp common_talk_listen
+101
View File
@@ -0,0 +1,101 @@
//
// IEC part of the LOAD routine
//
load_iec:
// Display SEARCHING FOR + filename
jsr lvs_display_searching_for
// http://www.zimmers.net/anonftp/pub/cbm/programming/serial-bus.pdf
// p13, 16; also p16 tells us this routine does not mess with the file
// table in the C64, only in the drive.
// Call device to LISTEN (p16)
lda FA
jsr LISTEN
bcc !+
jmp lvs_device_not_found_error // XXX deduplicate with other jumps in this routine
!:
// Open channel 0 (reserved for file reading)
lda #$00
jsr iec_cmd_open
bcc !+
jmp lvs_device_not_found_error // XXX deduplicate with other jumps in this routine
!:
// Send file name
jsr lvs_send_file_name
bcc !+
jmp lvs_load_verify_error // XXX deduplicate with other jumps in this routine
!:
// Now command device to talk (p16)
lda FA
jsr TALK
bcc !+
jmp lvs_load_verify_error // XXX deduplicate with other jumps in this routine
!:
lda #$60 // open channel / data (p3) , required according to p13
sta TBTCNT
jsr iec_tx_command
bcc !+
jmp lvs_load_verify_error // XXX deduplicate with other jumps in this routine
!:
// We are currently talker, so do the IEC turn around so that we
// are the listener (p16)
jsr iec_turnaround_to_listen
bcc !+
jmp lvs_load_verify_error // XXX deduplicate with other jumps in this routine
!:
// Get load address and store it if secondary address is zero
jsr iec_rx_byte
bcc !+
jmp kernalerror_FILE_NOT_FOUND // XXX deduplicate with other jumps in this routine
!:
ldx SA
beq !+
sta STAL+0
!:
jsr iec_rx_byte
bcc !+
jmp kernalerror_FILE_NOT_FOUND // XXX deduplicate with other jumps in this routine
!:
ldx SA
beq !+
sta STAL+1
!:
// Display start address
jsr lvs_display_loading_verifying
iec_load_loop:
// We are now ready to receive bytes
jsr iec_rx_byte
bcc !+
jmp lvs_load_verify_error // XXX deduplicate with other jumps in this routine
!:
// Handle the byte (store in memory / verify)
jsr lvs_handle_byte_load_verify
bcc !+
jmp lvs_load_verify_error // XXX deduplicate with other jumps in this routine
!:
// Advance pointer to data
jsr lvs_advance_pointer
bcc !+
jmp lvs_wrap_around_error
!:
// Check for EOI - if so, this was the last byte
lda IOSTATUS
and #K_STS_EOI
beq iec_load_loop
// Display end address
jsr lvs_display_done
// Close file on drive
lda FA
jsr close_load
// Return last address
jmp lvs_return_last_address
+1 -3
View File
@@ -17,7 +17,7 @@ TALK:
jsr iec_tx_flush
// Check whether device number is correct
jsr iec_check_devnum
jsr iec_check_devnum_oc
bcc !+
jmp kernalerror_DEVICE_NOT_FOUND
!:
@@ -28,5 +28,3 @@ common_talk_listen: // common part of TALK and LISTEN
sta TBTCNT
jmp iec_tx_command