more work towards IEC burst support

CONFIG.md

@@ -129,7 +129,7 @@ Needs about 430 bytes in KERNAL segment. If unsure - enable.
 
 ### `CONFIG_IEC_JIFFYDOS_BLANK`
 
-Causes screen blanking during iffyDOS file loading to increase performance.
+Causes screen blanking during JiffyDOS file loading to increase performance.
 
 ### `CONFIG_TAPE_NORMAL`
 

STATUS.md

@@ -8,8 +8,7 @@ Here are the features of the Open ROMs not found in the original ROMs from the 8
 * joystick can be used to move text cursor
 * pre-defined function keys
 
-* JiffyDOS protocol support
+* JiffyDOS and DolphinDOS protocols support
-* partial DolphinDOS protocol support
 * DOS wedge (direct mode only) - `@<drive_number>`, `@<command>`, `@$`, `@$<params>`, `@`
 
 * turbo tape load support (as device 7, or using `←L`), up to 250 blocks (can store bytes under I/O)

c64/kernal/iec/iec_cmd_open.s

@@ -17,18 +17,19 @@ iec_cmd_open: // similar to TKSA, but without turnaround
 !:
 	ora #$F0
 
-#if CONFIG_IEC_DOLPHINDOS || CONFIG_IEC_BURST_CIA1 || CONFIG_IEC_BURST_CIA2 || CONFIG_IEC_BURST_SOFT
+#if CONFIG_IEC_BURST_CIA1 || CONFIG_IEC_BURST_CIA2 || CONFIG_IEC_BURST_SOFT
+	pha
+	jsr burst_advertise
+	pla
+#endif
+
+#if CONFIG_IEC_DOLPHINDOS
 
 	sta TBTCNT
 	jsr iec_tx_command
 	bcs !+ // branch if error
 
-#if CONFIG_IEC_DOLPHINDOS
 	jsr dolphindos_detect
-#endif
-#if CONFIG_IEC_BURST_CIA1 || CONFIG_IEC_BURST_CIA2 || CONFIG_IEC_BURST_SOFT
-	jsr burst_detect
-#endif
 
 	jmp iec_tx_command_finalize
 

c64/kernal/iec/load_iec.s

@@ -57,6 +57,10 @@ load_iec:
 	jsr TALK
 	bcs load_iec_error
 
+#if CONFIG_IEC_BURST_CIA1 || CONFIG_IEC_BURST_CIA2 || CONFIG_IEC_BURST_SOFT
+	jsr burst_advertise
+#endif
+
 	lda #$60 // open channel / data (p3) , required according to p13
 	sta TBTCNT
 	jsr iec_tx_command
@@ -65,9 +69,6 @@ load_iec:
 #if CONFIG_IEC_DOLPHINDOS
 	jsr dolphindos_detect
 #endif
-#if CONFIG_IEC_BURST_CIA1 || CONFIG_IEC_BURST_CIA2 || CONFIG_IEC_BURST_SOFT
-	jsr burst_detect
-#endif
 
 	// We are currently talker, so do the IEC turn around so that we
 	// are the listener (p16)

c64/kernal/iec/save_iec.s

@@ -39,6 +39,10 @@ save_iec:
 	jsr LISTEN
 	bcs save_iec_dev_not_found
 
+#if CONFIG_IEC_BURST_CIA1 || CONFIG_IEC_BURST_CIA2 || CONFIG_IEC_BURST_SOFT
+	jsr burst_advertise
+#endif
+
 	lda #$61 // open channel / data (p3) , required according to p13
 	sta TBTCNT
 	jsr iec_tx_command
@@ -47,9 +51,6 @@ save_iec:
 #if CONFIG_IEC_DOLPHINDOS
 	jsr dolphindos_detect
 #endif
-#if CONFIG_IEC_BURST_CIA1 || CONFIG_IEC_BURST_CIA2 || CONFIG_IEC_BURST_SOFT
-	jsr burst_detect
-#endif
 
 	// Save start address
 	lda STAL+0

c64/kernal/iec_fast/burst_cia1_advertise.s

@@ -0,0 +1,33 @@
+
+//
+// Advertise burst IEC protocol support to the receiver
+//
+
+//
+// Based on idea by Pasi 'Albert' Ojala and description from
+// https://sites.google.com/site/h2obsession/CBM/C128/fast-serial-for-uiec
+//
+
+
+#if CONFIG_IEC_BURST_CIA1
+
+
+burst_advertise:
+
+#if CONFIG_IEC_JIFFYDOS
+
+	// Skip if other protocol (only JiffyDOS is possible at this moment) already detected
+	lda IECPROTO
+	bmi !+
+	bne burst_advertise_done              
+!:
+#endif
+
+	panic #$FF // XXX implement this
+
+burst_advertise_done:
+
+	rts
+
+
+#endif

c64/kernal/iec_fast/burst_cia1_detect.s

@@ -1,31 +0,0 @@
-
-//
-// Helper routine for burst IEC protocol support
-//
-
-//
-// Based on idea by Pasi 'Albert' Ojala
-//
-
-
-#if CONFIG_IEC_BURST_CIA1
-
-
-burst_detect:
-
-#if CONFIG_IEC_JIFFYDOS || CONFIG_IEC_DOLPHINDOS
-
-	lda IECPROTO
-	bmi !+
-	bne burst_detect_fail              // skip if other protocol already detected
-!:
-#endif
-
-	panic #$FF // XXX implement this
-
-burst_detect_fail:
-
-	rts
-
-
-#endif

c64/kernal/iec_fast/burst_cia2_advertise.s

@@ -1,29 +1,30 @@
 
 //
-// Helper routine for burst IEC protocol support
+// Advertise burst IEC protocol support to the receiver
 //
 
 //
-// Based on idea by Pasi 'Albert' Ojala
+// Based on idea by Pasi 'Albert' Ojala and description from
+// https://sites.google.com/site/h2obsession/CBM/C128/fast-serial-for-uiec
 //
 
 
 #if CONFIG_IEC_BURST_CIA2
 
 
-burst_detect:
+burst_advertise:
 
-#if CONFIG_IEC_JIFFYDOS || CONFIG_IEC_DOLPHINDOS
+#if CONFIG_IEC_JIFFYDOS
 
+	// Skip if other protocol (only JiffyDOS is possible at this moment) already detected
 	lda IECPROTO
 	bmi !+
-	bne burst_detect_fail              // skip if other protocol already detected
+	bne burst_advertise_done              
 !:
 #endif
 
-	// For extra safety, do it on disabled interupts
+	// Make sure this is not done under ATN
-	php
+	jst iec_release_atn
-	sei
 
 	// Set the clock rate to the fastest possible
 	ldy #$01
@@ -46,19 +47,9 @@ burst_detect:
 	bit CIA2_ICR                       
 	beq !-
 
-	// Now see if we get any byte back
-
-	lda CIA2_SDR    // XXX we do not need a value, we need to know if it was received
-
-
-	panic #$00      // XXX finish this routine
-	
-
-	plp
-
 	// FALLTROUGH
 
-burst_detect_fail:
+burst_advertise_done:
 
 	rts
 

c64/kernal/iec_fast/burst_soft_advertise.s

@@ -0,0 +1,28 @@
+
+//
+// Advertise burst IEC protocol support to the receiver
+//
+
+
+#if CONFIG_IEC_BURST_SOFT
+
+
+burst_advertise:
+
+#if CONFIG_IEC_JIFFYDOS
+
+	// Skip if other protocol (only JiffyDOS is possible at this moment) already detected
+	lda IECPROTO
+	bmi !+
+	bne burst_advertise_done:              
+!:
+#endif
+
+	panic #$FF // XXX implement this
+
+burst_advertise_done:
+
+	rts
+
+
+#endif

c64/kernal/iec_fast/burst_soft_detect.s

@@ -1,27 +0,0 @@
-
-//
-// Helper routine for burst IEC protocol support
-//
-
-
-#if CONFIG_IEC_BURST_SOFT
-
-
-burst_detect:
-
-#if CONFIG_IEC_JIFFYDOS || CONFIG_IEC_DOLPHINDOS
-
-	lda IECPROTO
-	bmi !+
-	bne burst_detect_fail              // skip if other protocol already detected
-!:
-#endif
-
-	panic #$FF // XXX implement this
-
-burst_detect_fail:
-
-	rts
-
-
-#endif

c64/kernal/iec_fast/dolphindos_detect.s

@@ -20,13 +20,6 @@
 
 dolphindos_detect:
 
-#if CONFIG_IEC_JIFFYDOS
-
-	lda IECPROTO
-	bne dolphindos_detect_fail         // skip if other protocol already detected
-
-#endif
-
 	// Make sure the port settings are correct
 
 	lda #$7F