new SCNKEY is now more configurable (size vs features)

c64/kernal/cint_real.s

@@ -75,7 +75,7 @@ cint_brk: // entry for BRK and STOP+RESTORE - XXX, where should it start?
 
 	// Enable cursor repeat - XXX make it configurable
 
-#if CONFIG_KEY_REPEAT
+#if CONFIG_KEY_REPEAT_DEFAULT && !CONFIG_KEY_REPEAT_ALWAYS
 
 	lda #$80
 	sta RPTFLG
@@ -84,7 +84,7 @@ cint_brk: // entry for BRK and STOP+RESTORE - XXX, where should it start?
 
 	// Set keyboard decode vector  (Compute's Mapping the 64 p215)
 
-#if CONFIG_SCNKEY_TWW_CTR
+#if CONFIG_LEGACY_SCNKEY
 
 	// Set initial variables for our improved keyboard scan routine
 	lda #$FF

c64/kernal/keyboard/kb_matrix_alwaysrepeat.s

@@ -7,7 +7,7 @@
 //
 
 
-#if !CONFIG_SCNKEY_TWW_CTR
+#if !CONFIG_LEGACY_SCNKEY && !CONFIG_KEY_REPEAT_ALWAYS
 
 
 kb_matrix_alwaysrepeat:
@@ -20,4 +20,4 @@ kb_matrix_alwaysrepeat:
 __kb_matrix_alwaysrepeat_end:
 
 
-#endif // no CONFIG_SCNKEY_TWW_CTR
+#endif // no CONFIG_LEGACY_SCNKEY and no CONFIG_KEY_REPEAT_ALWAYS

c64/kernal/keyboard/kb_matrix_bucky.s

@@ -7,7 +7,7 @@
 //
 
 
-#if !CONFIG_SCNKEY_TWW_CTR
+#if !CONFIG_LEGACY_SCNKEY
 
 
 kb_matrix_bucky_confmask: // values to be written to CIA1_PRA
@@ -33,4 +33,4 @@ kb_matrix_bucky_shflag: // mask to be ORed to SHFLAG to mark key status
 	.byte KEY_FLAG_CTRL
 
 
-#endif // no CONFIG_SCNKEY_TWW_CTR
+#endif // no CONFIG_LEGACY_SCNKEY

c64/kernal/keyboard/kb_matrix_bucky_filter.s

@@ -7,7 +7,7 @@
 //
 
 
-#if !CONFIG_SCNKEY_TWW_CTR
+#if !CONFIG_LEGACY_SCNKEY
 
 
 kb_matrix_bucky_filter:
@@ -24,4 +24,4 @@ kb_matrix_bucky_filter:
 	.byte %00100100 // VENDOR + CONTROL
 
 
-#endif // no CONFIG_SCNKEY_TWW_CTR
+#endif // no CONFIG_LEGACY_SCNKEY

c64/kernal/keyboard/kb_matrix_joy.s

@@ -4,7 +4,7 @@
 //
 
 
-#if !CONFIG_SCNKEY_TWW_CTR && (CONFIG_JOY1_CURSOR || CONFIG_JOY2_CURSOR)
+#if !CONFIG_LEGACY_SCNKEY && (CONFIG_JOY1_CURSOR || CONFIG_JOY2_CURSOR)
 
 
 kb_matrix_joy_status:

c64/kernal/keyboard/kb_matrix_lookup.s

@@ -7,7 +7,7 @@
 //
 
 
-#if !CONFIG_SCNKEY_TWW_CTR 
+#if !CONFIG_LEGACY_SCNKEY 
 
 kb_matrix_lookup:
 

c64/kernal/keyboard/kb_matrix_lookup_legacy.s

@@ -12,9 +12,9 @@
 // This lookup table is used by TWW/CTR keyboard routine only!
 
 
-#if CONFIG_SCNKEY_TWW_CTR
+#if CONFIG_LEGACY_SCNKEY
 
-kb_matrix_lookup_tww_ctr:
+kb_matrix_lookup:
 
 	.byte $00 		// Normal
 	.byte $40		// Shifted
@@ -25,4 +25,4 @@ kb_matrix_lookup_tww_ctr:
 	.byte $80		// Vendor + CTRL
 	.byte $80		// Vendor + CTRL + SHIFT
 
-#endif // CONFIG_SCNKEY_TWW_CTR
+#endif // CONFIG_LEGACY_SCNKEY

c64/kernal/keyboard/kb_matrix_row_keys.s

@@ -7,7 +7,7 @@
 //
 
 
-#if !CONFIG_SCNKEY_TWW_CTR
+#if !CONFIG_LEGACY_SCNKEY
 
 
 kb_matrix_row_keys:
@@ -25,4 +25,4 @@ kb_matrix_row_keys:
 	.byte %01111111
 
 
-#endif // no CONFIG_SCNKEY_TWW_CTR
+#endif // no CONFIG_LEGACY_SCNKEY

c64/kernal/keyboard/kb_matrix_row_offsets.s

@@ -4,7 +4,7 @@
 //
 
 
-#if !CONFIG_SCNKEY_TWW_CTR
+#if !CONFIG_LEGACY_SCNKEY
 
 
 kb_matrix_row_offsets:
@@ -20,4 +20,4 @@ kb_matrix_row_offsets:
 	.byte 6*8
 	.byte 7*8
 
-#endif // no CONFIG_SCNKEY_TWW_CTR
+#endif // no CONFIG_LEGACY_SCNKEY

c64/kernal/keyboard/scnkey.s

@@ -25,7 +25,7 @@
 // XXX add Commodore 65 keyboard support
 
 
-#if !CONFIG_SCNKEY_TWW_CTR
+#if !CONFIG_LEGACY_SCNKEY
 
 // Routine takes some ideas from TWW/CTR proposal, see here:
 // - http://codebase64.org/doku.php?id=base:scanning_the_keyboard_the_correct_and_non_kernal_way
@@ -44,7 +44,7 @@ SCNKEY:
 
 	// Check for any activity
 
-#if !CONFIG_JOY2_CURSOR
+#if !CONFIG_JOY2_CURSOR && CONFIG_KEY_FAST_SCAN
 
 	ldx #$00
 	stx CIA1_PRA                   // connect all the rows
@@ -93,13 +93,17 @@ scnkey_bucky_loop:
 
 	bne scnkey_joystick_filtered
 
+#if CONFIG_KEY_FAST_SCAN
+
 	inx                            // puts $00
 	stx CIA1_PRA                   // connect all the rows
 	dex                            // puts $FF
 	cpx CIA1_PRB
 	beq scnkey_no_keys
 
-#endif
+#endif // CONFIG_KEY_FAST_SCAN
+
+#endif // CONFIG_JOY2_CURSOR
 
 	// Check for control port 1 activity (can interfere with keyboard)
 
@@ -262,6 +266,8 @@ scnkey_done:
 
 scnkey_try_repeat:
 
+#if !CONFIG_KEY_REPEAT_ALWAYS
+
 	// Check whether we should repeat keys - first the flag, afterwards hardcoded list
 
 	lda RPTFLG
@@ -278,6 +284,8 @@ scnkey_try_repeat:
 
 scnkey_handle_repeat:
 
+#endif // no CONFIG_KEY_REPEAT_ALWAYS
+
 	// Countdown before first repeat
 
 	lda DELAY
@@ -309,4 +317,4 @@ via_keylog:
 	jmp (KEYLOG)
 
 
-#endif // no CONFIG_SCNKEY_TWW_CTR
+#endif // no CONFIG_LEGACY_SCNKEY

c64/kernal/keyboard/scnkey_legacy.s

@@ -9,7 +9,7 @@
 //
 
 
-#if CONFIG_SCNKEY_TWW_CTR
+#if CONFIG_LEGACY_SCNKEY
 
 
 // Scan the keyboard..
@@ -116,7 +116,7 @@ accept_key:
 	tax
 	pla
 	and #$3f
-	ora kb_matrix_lookup_tww_ctr,x
+	ora kb_matrix_lookup,x
 	tax
 	lda kb_matrix,x
 	// But don't insert $00 characters
@@ -521,4 +521,4 @@ KeyRepeatWait:
 	jmp ConsiderNextKey
 
 
-#endif // CONFIG_SCNKEY_TWW_CTR
+#endif // CONFIG_LEGACY_SCNKEY

c64/kernal/keyboard/scnkey_set_keytab.s

@@ -9,7 +9,7 @@
 scnkey_set_keytab:
 
 
-#if CONFIG_SCNKEY_TWW_CTR // routine not compatible with legacy SCNKEY
+#if CONFIG_LEGACY_SCNKEY // routine not compatible with legacy SCNKEY
 
 	rts
 
@@ -54,7 +54,7 @@ scnkey_valid_offset:
 	// FALLTROUGH
 
 
-#endif // no CONFIG_SCNKEY_TWW_CTR
+#endif // no CONFIG_LEGACY_SCNKEY
 
 
 scnkey_toggle_if_needed: // entry for SCNKEY (TWW/CTR version)