started work on RS-232 implementation

This commit is contained in:
FeralChild64 committed 2019-10-29 17:42:48 +01:00
1 parent 9f4c399158
commit 83d2511221
14 files changed
+165 -43

No files matched your search

+1
View File
@@ -22,6 +22,7 @@ SRCDIR_KERNAL = $(SRCDIR_COMMON) \
c64/kernal/memory \ c64/kernal/memory \
c64/kernal/print \ c64/kernal/print \
c64/kernal/rom_revision \ c64/kernal/rom_revision \
c64/kernal/rs232 \
c64/kernal/screen \ c64/kernal/screen \
c64/kernal/time c64/kernal/time
+5 -4
View File
@@ -40,10 +40,11 @@
// I/O devices // I/O devices
#define CONFIG_IEC // please keep enabled for now #define CONFIG_IEC // please keep enabled for now
// #define CONFIG_TAPE_NORMAL // please keep disabled for now // #define CONFIG_TAPE_NORMAL // please keep disabled for now
// #define CONFIG_TAPE_TURBO // please keep disabled for now // #define CONFIG_TAPE_TURBO // please keep disabled for now
// #define CONFIG_RS232_USERPORT // please keep disabled for now // #define CONFIG_RS232_UP2400 // please keep disabled for now
// #define CONFIG_RS232_UP9600 // please keep disabled for now
// Multiple SID support // Multiple SID support
+5 -4
View File
@@ -42,10 +42,11 @@
// I/O devices // I/O devices
#define CONFIG_IEC // please keep enabled for now #define CONFIG_IEC // please keep enabled for now
// #define CONFIG_TAPE_NORMAL // please keep disabled for now // #define CONFIG_TAPE_NORMAL // please keep disabled for now
// #define CONFIG_TAPE_TURBO // please keep disabled for now // #define CONFIG_TAPE_TURBO // please keep disabled for now
// #define CONFIG_RS232_USERPORT // please keep disabled for now // #define CONFIG_RS232_UP2400 // please keep disabled for now
// #define CONFIG_RS232_UP9600 // please keep disabled for now
// Multiple SID support // Multiple SID support
+5 -4
View File
@@ -41,10 +41,11 @@
// I/O devices // I/O devices
#define CONFIG_IEC // please keep enabled for now #define CONFIG_IEC // please keep enabled for now
// #define CONFIG_TAPE_NORMAL // please keep disabled for now // #define CONFIG_TAPE_NORMAL // please keep disabled for now
// #define CONFIG_TAPE_TURBO // please keep disabled for now // #define CONFIG_TAPE_TURBO // please keep disabled for now
// #define CONFIG_RS232_USERPORT // please keep disabled for now // #define CONFIG_RS232_UP2400 // please keep disabled for now
// #define CONFIG_RS232_UP9600 // please keep disabled for now
// Multiple SID support // Multiple SID support
+5 -4
View File
@@ -40,10 +40,11 @@
// I/O devices // I/O devices
#define CONFIG_IEC // please keep enabled for now #define CONFIG_IEC // please keep enabled for now
// #define CONFIG_TAPE_NORMAL // please keep disabled for now // #define CONFIG_TAPE_NORMAL // please keep disabled for now
// #define CONFIG_TAPE_TURBO // please keep disabled for now // #define CONFIG_TAPE_TURBO // please keep disabled for now
// #define CONFIG_RS232_USERPORT // please keep disabled for now // #define CONFIG_RS232_UP2400 // please keep disabled for now
// #define CONFIG_RS232_UP9600 // please keep disabled for now
// Multiple SID support // Multiple SID support
+20
View File
@@ -107,6 +107,20 @@
} }
// Check that I/O configuration is correct
{
.var selected_rs232 = 0;
#if CONFIG_RS232_UP2400
.eval selected_rs232++
#endif
#if CONFIG_RS232_UP9600
.eval selected_rs232++
#endif
.if (selected_rs232 > 1) .error "Please select at most one CONFIG_RS232_* option"
}
// Check that startup banner configuration is correct // Check that startup banner configuration is correct
{ {
@@ -207,6 +221,12 @@
#endif #endif
// Handle I/O configuration
#if CONFIG_RS232_UP2400 || CONFIG_RS232_UP9600
#define HAS_RS232
#endif
// Handle configuration of various features // Handle configuration of various features
+26 -27
View File
@@ -5,7 +5,7 @@
// - [RG64] C64 Programmer's Reference Guide - page 275 (CHKIN) / 276 (CKOUT) // - [RG64] C64 Programmer's Reference Guide - page 275 (CHKIN) / 276 (CKOUT)
// - [CM64] Compute's Mapping the Commodore 64 - page 229 // - [CM64] Compute's Mapping the Commodore 64 - page 229
// //
// CPU registers that has to be preserved (see [RG64]): .Y, possibly .A (XXX - see [CM64], page 213) // CPU registers that has to be preserved (see [RG64]): .Y, .A (see [CM64], page 213)
// //
@@ -13,7 +13,8 @@
chkin_real: chkin_real:
// Store Y for preservation // Store registers for preservation
pha
phy_trash_a phy_trash_a
// Reset status // Reset status
@@ -37,7 +38,7 @@ chkin_real:
lda LAT, Y lda LAT, Y
cmp #$01 cmp #$01
beq chkinout_file_not_input beq chkin_file_not_input
#if CONFIG_IEC #if CONFIG_IEC
@@ -58,47 +59,41 @@ chkin_real:
chkin_set_device: chkin_set_device:
lda FAT,Y lda FAT,Y
sta DFLTN sta DFLTN
clc // for success
// FALLTROUGH // FALLTROUGH
// Common part for booth CHKIN and CKOUT // Common part for booth CHKIN and CKOUT
// XXX add CPU-dependent optimizations here
chkinout_end: chkinout_end:
tax ply_trash_a
pla pla
tay clc // indicate success
txa
rts rts
chkin_file_not_input: // XXX move this out of common section
ply_trash_a
pla
jmp kernalerror_FILE_NOT_INPUT
chkinout_file_not_open: chkinout_file_not_open:
ply_trash_a
pla pla
tay
jmp kernalerror_FILE_NOT_OPEN jmp kernalerror_FILE_NOT_OPEN
chkinout_device_not_present: chkinout_device_not_present:
ply_trash_a
pla pla
tay
jsr kernalstatus_DEVICE_NOT_FOUND jsr kernalstatus_DEVICE_NOT_FOUND
jmp kernalerror_DEVICE_NOT_FOUND jmp kernalerror_DEVICE_NOT_FOUND
chkinout_file_not_input:
pla
tay
jmp kernalerror_FILE_NOT_INPUT
chkinout_file_not_output:
pla
tay
jmp kernalerror_FILE_NOT_OUTPUT
// CKOUT implementation // CKOUT implementation
ckout_real: ckout_real:
// Store Y for preservation // Store registers for preservation
tya
pha pha
phy_trash_a
// Reset status // Reset status
jsr kernalstatus_reset jsr kernalstatus_reset
@@ -118,19 +113,19 @@ ckout_real:
beq chkinout_device_not_present // RS-232 not implemented beq chkinout_device_not_present // RS-232 not implemented
cmp #$00 cmp #$00
beq chkinout_file_not_output // cannot output to keyboard - XXX check real ROM behaviour beq ckout_file_not_output // cannot output to keyboard - XXX check real ROM behaviour
// Fail if the file is open for reading (secondary address 0) // Fail if the file is open for reading (secondary address 0)
lda LAT, Y lda LAT, Y
beq chkinout_file_not_output beq ckout_file_not_output
#if CONFIG_IEC #if CONFIG_IEC
// For IEC devices, send LISTEN + SECOND first // For IEC devices, send LISTEN + SECOND first
lda FAT,Y lda FAT,Y
jsr iec_check_devnum_oc jsr iec_check_devnum_oc
bcs chkout_set_device bcs ckout_set_device
jsr LISTEN jsr LISTEN
bcs chkinout_device_not_present // don't set DFLTO in case of failure bcs chkinout_device_not_present // don't set DFLTO in case of failure
@@ -141,9 +136,13 @@ ckout_real:
#endif // CONFIG_IEC #endif // CONFIG_IEC
chkout_set_device: ckout_set_device:
lda FAT,Y lda FAT,Y
sta DFLTO sta DFLTO
clc // for success
jmp chkinout_end jmp chkinout_end
ckout_file_not_output:
ply_trash_a
pla
jmp kernalerror_FILE_NOT_OUTPUT
+14
View File
@@ -0,0 +1,14 @@
//
// RS-232 part of the CHKIN routine
//
#if HAS_RS232
chkin_rs232:
STUB_IMPLEMENTATION() // XXX provide implementation for both UP2400 and UP9600
#endif // HAS_RS232
+14
View File
@@ -0,0 +1,14 @@
//
// RS-232 part of the CHKRIN routine
//
#if HAS_RS232
chrin_rs232:
STUB_IMPLEMENTATION() // XXX provide implementation for both UP2400 and UP9600
#endif // HAS_RS232
+14
View File
@@ -0,0 +1,14 @@
//
// RS-232 part of the CHROUT routine
//
#if HAS_RS232
chrout_rs232:
STUB_IMPLEMENTATION() // XXX provide implementation for both UP2400 and UP9600
#endif // HAS_RS232
+14
View File
@@ -0,0 +1,14 @@
//
// RS-232 part of the CKOUT routine
//
#if HAS_RS232
ckout_rs232:
STUB_IMPLEMENTATION() // XXX provide implementation for both UP2400 and UP9600
#endif // HAS_RS232
+14
View File
@@ -0,0 +1,14 @@
//
// RS-232 part of the CLOSE routine
//
#if HAS_RS232
close_rs232:
STUB_IMPLEMENTATION() // XXX provide implementation for both UP2400 and UP9600
#endif // HAS_RS232
+14
View File
@@ -0,0 +1,14 @@
//
// RS-232 part of the GETIN routine
//
#if HAS_RS232
getin_rs232:
STUB_IMPLEMENTATION() // XXX provide implementation for both UP2400 and UP9600
#endif // HAS_RS232
+14
View File
@@ -0,0 +1,14 @@
//
// RS-232 part of the OPEN routine
//
#if HAS_RS232
open_rs232:
STUB_IMPLEMENTATION() // XXX provide implementation for both UP2400 and UP9600
#endif // HAS_RS232