adapted to Kick Assembler, some documentation update

This commit is contained in:
FeralChild64 committed 2019-09-07 12:35:21 +02:00
1 parent ae23dbae7b
commit de27124b4f
198 files changed
+4181 -3976

No files matched your search

+40 -40
View File
@@ -1,96 +1,96 @@
;; Implemented based on https://www.pagetable.com/?p=1135, https://github.com/mist64/cbmbus_doc
// Implemented based on https://www.pagetable.com/?p=1135, https://github.com/mist64/cbmbus_doc
;; Expects byte to send in IEC_TMP2 ($A4 is a byte buffer according to http://sta.c64.org/cbm64mem.html)
;; Carry flag set = signal EOI
;;
;; Preserves .X and .Y registers
// Expects byte to send in IEC_TMP2 ($A4 is a byte buffer according to http://sta.c64.org/cbm64mem.html)
// Carry flag set = signal EOI
//
// Preserves .X and .Y registers
iec_tx_byte:
;; Store .X and .Y on the stack - preserve them
// Store .X and .Y on the stack - preserve them
txa
pha
tya
pha
;; Notify all devices that we are going to send a byte
;; and it is going to be a data byte (released ATN)
// Notify all devices that we are going to send a byte
// and it is going to be a data byte (released ATN)
jsr iec_release_atn_clk_data
;; Common part of iec_tx_byte and iec_tx_command
;; Implemented based on https://www.pagetable.com/?p=1135, https://github.com/mist64/cbmbus_doc
;; and http://www.zimmers.net/anonftp/pub/cbm/programming/serial-bus.pdf
// Common part of iec_tx_byte and iec_tx_command
// Implemented based on https://www.pagetable.com/?p=1135, https://github.com/mist64/cbmbus_doc
// and http://www.zimmers.net/anonftp/pub/cbm/programming/serial-bus.pdf
iec_tx_common:
;; Timing is critical here - execute on disabled IRQs
// Timing is critical here - execute on disabled IRQs
php
sei
;; Wait till all receivers are ready, they should all release DATA
// Wait till all receivers are ready, they should all release DATA
jsr iec_wait_for_data_release
bcc +
bcc !+
;; At this point a delay 256 usec or more is considered EOI,
;; receiver should now acknowledge it by pulling data for at least 60 usec
;; Keep the implementation as simple as possible: data should be released now
;; so wait until it's pushed and released again
// At this point a delay 256 usec or more is considered EOI,
// receiver should now acknowledge it by pulling data for at least 60 usec
// Keep the implementation as simple as possible: data should be released now
// so wait until it's pushed and released again
jsr iec_wait_for_data_pull
jsr iec_wait_for_data_release
*
;; Pull CLK back to indicate that DATA is not valid, keep it for 60us
;; We can use this routine as we don't hold DATA anyway (and its state doesn't even matter)
!:
// Pull CLK back to indicate that DATA is not valid, keep it for 60us
// We can use this routine as we don't hold DATA anyway (and its state doesn't even matter)
jsr iec_pull_clk_release_data_oneshot
jsr iec_wait60us
;; Now, we can start transmission of 8 bits of data
// Now, we can start transmission of 8 bits of data
ldx #7
iec_tx_common_sendbit:
;; Is next bit 0 or 1?
// Is next bit 0 or 1?
lda IEC_TMP2
lsr
sta IEC_TMP2
bcs +
bcs !+
;; Bit is 0
// Bit is 0
jsr iec_release_clk_pull_data
jmp iec_tx_common_bit_is_sent
*
;; Bit is 1
!:
// Bit is 1
jsr iec_release_clk_data
iec_tx_common_bit_is_sent:
;; Wait 20us, so that device(s) can pick DATA
// Wait 20us, so that device(s) can pick DATA
jsr iec_wait20us
;; Pull CLK for 20us again, before sending the next bit
;; or performing any other action
// Pull CLK for 20us again, before sending the next bit
// or performing any other action
jsr iec_pull_clk_release_data_oneshot
jsr iec_wait20us
;; More bits to send?
// More bits to send?
dex
bpl iec_tx_common_sendbit
plp
;; Give device time to tell if they are busy by pulling DATA
;; They should do it within 1ms
// Give device time to tell if they are busy by pulling DATA
// They should do it within 1ms
ldx #$FF
* lda CIA2_PRA
;; BPL here is checking that bit 7 clears,
;; i.e, that the DATA line is pulled by drive
bpl +
!: lda CIA2_PRA
// BPL here is checking that bit 7 clears,
// i.e, that the DATA line is pulled by drive
bpl !+
dex
bne -
bmi +
bne !-
bmi !+
jmp iec_return_DEVICE_NOT_FOUND
*
!:
jmp iec_return_success