small improvements for LOAD command and IEC routines

c64/basic/cmd_load.s

@@ -20,9 +20,8 @@ cmd_load:
 *
 	jsr JSETMSG
 	
-	;; XXX temporary, to set valid device number
+	;; XXX handle device number from arguments, if not present, use the call below
-	lda #$08
+	jsr set_sane_devnum
-	sta current_device_number
 	
 	;; Set filename and length
 	lda #$00

c64/basic/set_sane_devnum.s

@@ -0,0 +1,17 @@
+
+set_sane_devnum:
+
+	;; Take last device number, make sure it's a drive
+	;; If not, set to 8 (first drive number)
+	;; Device number is left in X, for SETFLS Kernal routine
+
+	;; Note: if tape support is introduced here, make sure DOS wedge won't get broken
+
+	ldx current_device_number
+	cpx #$07
+	bpl +
+	bcs +
+	ldx #$08
+	stx current_device_number
+*
+	rts

c64/basic/wedge_dos.s

@@ -6,15 +6,11 @@ wedge_dos:
 	;; Close all the channels, so that wedge has full control
 	jsr wedge_dos_CLALL
 
-	;; Take last device number, make sure it's a drive
+	;; Make sure current device number is sane
-	;; If not, set to 8 (first drive number)
+	jsr set_sane_devnum
-	ldx DFLTN
+
-	cpx #$07
+	;; Set remaining file parameters (X already set by set_sane_devnum);
-	bpl +
+	;; channel 15 is a typical one for commands
-	bcs +
-	ldx #$08
-*
-	;; Set remaining file parameters; channel 15 is a typical one for commands
 	lda #$0F
 	ldy #$0F
 	jsr JSETFLS
@@ -67,7 +63,7 @@ wedge_dos_change_drive:
 	bcs +
 	jmp do_ILLEGAL_DEVICE_NUMBER_error
 *
-	sta DFLTN
+	sta current_device_number
 	jmp basic_end_of_line
 
 wedge_dos_status:
@@ -77,7 +73,7 @@ wedge_dos_status:
 
 	;; Set remaining file parameters, open the channel
 	lda #$00  ; empty file name
-	jsr $FFBD ; SETNAM
+	jsr JSETNAM
 	jsr wedge_dos_OPEN
 	bcc +
 	jmp do_DEVICE_NOT_PRESENT_error
@@ -90,8 +86,8 @@ wedge_dos_status:
 *   
 	;; Print out everything retrieved from the drive
 	bne +
-	jsr $FFCF ; CHRIN
+	jsr JCHRIN
-	jsr $FFD2 ; CHROUT
+	jsr JCHROUT
 	jmp -
 *
 	;; Clean-up and exit

c64/kernal/chkin.s

@@ -1,3 +1,19 @@
 ; Function defined on pp272-273 of C64 Programmers Reference Guide
+
 chkin:
+
+	;; Implemented according to 'C64 Programmers Reference Guide', page 277
+
+	;; First retrieve the FAT/LAT/SAT table index (and check if file is open)
+
+	; txa
+	; jsr find_fls
+	; bcs kernalerror_FILE_NOT_OPEN
+
+	;; Now we have table index in Y - check if file is open for reading
+
+	;; XXX continue implementation
+
 	rts
+
+

c64/kernal/chkout.s

@@ -1,3 +1,17 @@
 ; Function defined on pp272-273 of C64 Programmers Reference Guide
+
 chkout:
+
+	;; Implemented according to 'C64 Programmers Reference Guide', page 278
+
+	;; First retrieve the FAT/LAT/SAT table index (and check if file is open)
+
+	; txa
+	; jsr find_fls
+	; bcs kernalerror_FILE_NOT_OPEN
+
+	;; Now we have table index in Y - check if file is open for writing
+
+	;; XXX continue implementation
+
 	rts

c64/kernal/close.s

@@ -7,13 +7,8 @@ close:
 
 	;; Find the LAT / SAT / FAT entry which LAT corresponds to A
 
-	ldy LDTND
+	jsr find_fls
-	beq close_error_not_found ; table empty
+	bcs close_error_not_found ;; XXX can we report error in IOSTATUS here?
-*
-	dey
-	bmi close_error_not_found ; no more entries
-	cmp LAT, y
-	bne - ; does not match, try the next one
 
 	;; We have the entry index in Y
 
@@ -33,9 +28,9 @@ close:
 *
 	;; Decrement the list size variable
 	dec LDTND
-	;; FALLTHROUGH (for now) - success
+
+	;; FALLTHROUGH - success
 
 close_error_not_found:
 
-	;; XXX it seems that this function can't report errors, am I right?
 	rts

c64/kernal/findfls.s

@@ -0,0 +1,23 @@
+
+;; Just a helper routine
+
+;; Find the LAT / SAT / FAT entry index where LAT corresponds to A, returns index in Y
+;; Carry flag set means not found
+
+find_fls:
+
+	ldy LDTND
+	beq find_fls_not_found ; table empty
+*
+	dey
+	bmi find_fls_not_found ; no more entries
+	cmp LAT, y
+	bne - ; does not match, try the next one
+	
+	clc
+	rts
+
+find_fls_not_found:
+
+	sec
+	rts

c64/kernal/load.s

@@ -54,9 +54,6 @@ print_filename_loop:
 	iny
 	jmp print_filename_loop
 *
-	lda #$0d
-	jsr JCHROUT
-
 	;; XXX - Use default device number
 	;; http://www.zimmers.net/anonftp/pub/cbm/programming/serial-bus.pdf
 	;; p13, 16.
@@ -145,11 +142,11 @@ sent_filename:
 	lda kernal_load_or_verify_flag
 	beq +
 	jsr printf
-	.byte "VERIFYING", 0
+	.byte $0D, "VERIFYING", 0
 	jmp load_print_start_addr
 *
 	jsr printf
-	.byte "LOADING", 0
+	.byte $0D, "LOADING", 0
 load_print_start_addr:
 	jsr printf
 	.byte " FROM $",0
@@ -223,9 +220,8 @@ load_done:
 	;; Set IEC status back to idle
 	jsr iec_set_idle
 
-	;; Return last address written to +1
+	;; Return last address - Compute's Mapping the 64 says without the '+1',
-	;; (Even though Compute's Mapping the 64 says without the +1.
+	;; checked on original ROMs that this is really the case
-	;; I'm suspicious. Will have to check behavour on an original C64)
 	ldx load_save_start_ptr+0
 	ldy load_save_start_ptr+1