;
; Memory locations for the DOS
;

; NOTES:
; - starting from $8000, 16KB RAM is available (starting from $10000 in C65 address space)
; - additional 16KB RAM is reserved for DOS too ($14000-$17FFF), and can be banked-in if needed


	;
	; Temporary storage locations
	;

	!addr MEM_BUF = $1000          ; buffer for hypervisor calls; starting at $1000 VIC sees chargen, so this should be a safe place


	;
	; Page start+0
	;

	!addr MAGICSTR         = $8000 ; magic string; if not matching, DOS considered non-functional

	; Register storage

	!addr REG_A            = $8005
	!addr REG_X            = $8006
	!addr REG_Y            = $8007
	!addr REG_Z            = $8008

	; System configuration

	!addr RAM_ATTIC        = $8009 ; $8000000-$87FFFFF RAM status; 0 = not present, $FF = present
	!addr RAM_CELLAR       = $800A ; $8800000-$8FFFFFF RAM status; 0 = not present, $FF = present

	!addr RD_MSG           = $800B ; code of the RAM disk message to be displayed on banner screen, $FF for none

	; General DOS configuration

	!addr UNIT_SDCARD      = $800C ; unit number for device, 0 = none
	!addr UNIT_FLOPPY0     = $800D ; as above - for the internal floppy
	!addr UNIT_FLOPPY1     = $800E ; as above - for additional floppy drive
	!addr UNIT_RAMDISK     = $800F ; as above - for the RAM disk

	; General DOS status

	!addr IDX1_LISTENER    = $8010 ; listener idx, >=$80 = none
	!addr IDX2_LISTENER    = $8011 ; listener idx * 2, >=$80 = none - for calling routines via vector table
	!addr IDX1_TALKER      = $8012 ; talker idx, >=$80 = none
	!addr IDX2_TALKER      = $8013 ; talker idx * 2, >=$80 = none - for calling routines via vector table

	; Helper subroutines to fetch data

	!addr code_LDA_nnnn_Y  = $8014 ; - LDA nnnn, Y instruction
	!addr par_LDA_nnnn_Y   = $8015 ; - 2 bytes; address
	!addr code_RTS_05      = $8017 ; - RTS instruction

	; Parameters for utilities/helpers

	!addr PAR_TRACK        = $8018 ; track number, also for status/error
	!addr PAR_SECTOR       = $8019 ; sector number, also for status/error	

	!addr PAR_FSIZE_BYTES  = $801A ; 4 bytes - file size in bytes
	!addr PAR_FSIZE_BLOCKS = $801E ; 2 bytes - file size in blocks

	!addr PAR_FTYPE        = $8020 ; bits 0-5 - type, bits 6-7 - protected, closed        
	!addr PAR_FNAME        = $8021 ; 16 bytes - filename, filled with $A0
	!addr PAR_FPATTERN     = $8031 ; 16 bytes - pattern to match, filled with $A0

	!addr PAR_FSINSTANCE   = $8041 ; 0 = SD card, 1/2 = floppy, 3 = ram disk

	; Various temporary data

	!addr XX_DIR_PHASE     = $8042 ; directory output phase, values deponds on device driver, but 0 = not reading
	!addr SD_DIR_PHASE     = $8042 ; - SD card
	!addr F0_DIR_PHASE     = $8043 ; - floppy 0
	!addr F1_DIR_PHASE     = $8044 ; - floppy 0
	!addr RD_DIR_PHASE     = $8045 ; - ram disk

	; Free space: $8046-$8063

	!addr SD_ACPTR_helper  = $8052 ; subroutine in RAM to read a byte
	!addr code_LDA_01      = $8052 ; - LDA instruction
	!addr SD_ACPTR_PTR     = $8053 ; - 2 bytes; address in buffer, SD card
	!addr code_RTS_01      = $8055 ; - RTS instruction
	
	!addr F0_ACPTR_helper  = $8056 ; subroutine in RAM to read a byte
	!addr code_LDA_02      = $8056 ; - LDA instruction
	!addr F0_ACPTR_PTR     = $8057 ; - 2 bytes; address in buffer, floppy 0
	!addr code_RTS_02      = $8059 ; - RTS instruction
	
	!addr F1_ACPTR_helper  = $805A ; subroutine in RAM to read a byte
	!addr code_LDA_03      = $805A ; - LDA instruction
	!addr F1_ACPTR_PTR     = $805B ; - 2 bytes; address in buffer, floppy 1
	!addr code_RTS_03      = $805D ; - RTS instruction

	!addr RD_ACPTR_helper  = $805E ; subroutine in RAM to read a byte
	!addr code_LDA_04      = $805E ; - LDA instruction
	!addr RD_ACPTR_PTR     = $805F ; - 2 bytes; address in buffer, ram disk
	!addr code_RTS_04      = $8061 ; - RTS instruction

	!addr XX_ACPTR_LEN     = $8062 ; 2 bytes - length of data left for ACPTR
	!addr SD_ACPTR_LEN     = $8062 ; - SD card
	!addr F0_ACPTR_LEN     = $8064 ; - floppy
	!addr F1_ACPTR_LEN     = $8064 ; - floppy
	!addr RD_ACPTR_LEN     = $8066 ; - ram disk

	!addr XX_MODE          = $8068 ; current mode (0 = none, 1 = receiving command/file name)
	!addr SD_MODE          = $8068 ; - SD card
	!addr F0_MODE          = $8069 ; - floppy 0
	!addr F1_MODE          = $806A ; - floppy 1
	!addr RD_MODE          = $806B ; - ram disk

	!addr XX_CHANNEL       = $806C ; current channel
	!addr SD_CHANNEL       = $806C ; - SD card
	!addr F0_CHANNEL       = $806D ; - floppy 0
	!addr F1_CHANNEL       = $806E ; - floppy 0
	!addr RD_CHANNEL       = $806F ; - ram disk

	!addr XX_CMDFN_IDX     = $8070 ; index byte for storing file name/command
	!addr SD_CMDFN_IDX     = $8070 ; - SD card
	!addr F0_CMDFN_IDX     = $8071 ; - floppy 0
	!addr F1_CMDFN_IDX     = $8072 ; - floppy 1
	!addr RD_CMDFN_IDX     = $8073 ; - ram disk

	!addr XX_STATUS_IDX    = $8074 ; index byte for reading status 
	!addr SD_STATUS_IDX    = $8074 ; - SD card
	!addr F0_STATUS_IDX    = $8075 ; - floppy
	!addr F1_STATUS_IDX    = $8076 ; - floppy
	!addr RD_STATUS_IDX    = $8077 ; - ram disk

	; Various, most likely to be reworked

	!addr SD_DESC          = $8078 ; current file descriptor
	!addr F0_DIRENT        = $8079 ; directory entry to read, 0-15
	!addr F1_DIRENT        = $807A ; directory entry to read, 0-15

	!addr F0_LOADTRACK     = $807B ; current track for file loading
	!addr F0_LOADSECTOR    = $807C ; current sector for file loading

	!addr F1_LOADTRACK     = $807D ; current track for file loading
	!addr F1_LOADSECTOR    = $807E ; current sector for file loading

	!addr RD_MAXTRACK      = $807F ; maximum RAM disk track number of loaded image
	!addr RD_STARTSEG      = $8080 ; RAM disk start address, 2nd most significant byte (or $FF if no RAM)
	!addr RD_VALIDIMG      = $8081 ; $00 = no valid image loaded


	; Reserved: $8082-$81FF

	;
	; Various buffers, caches, and other large memory chunks
	;


	; General purpose buffers, 512 bytes each, each starts at page start - XXX dynamic alllocation to be written

	!addr SHARED_BUF_0     = $8200 ; XXX temporarily hardcoded for usage by SD card
	!addr SHARED_BUF_1     = $8400 ; XXX temporarily hardcoded for usage by floppy 0
	!addr SHARED_BUF_2     = $8600 ; XXX temporarily hardcoded for usage by floppy 1
	!addr SHARED_BUF_3     = $8800
	!addr SHARED_BUF_4     = $8A00
	!addr SHARED_BUF_5     = $8C00
	!addr SHARED_BUF_6     = $8E00
	!addr SHARED_BUF_7     = $9000
	!addr SHARED_BUF_8     = $9200
	!addr SHARED_BUF_9     = $9400
	!addr SHARED_BUF_A     = $9600
	!addr SHARED_BUF_B     = $9800
	!addr SHARED_BUF_C     = $9A00
	!addr SHARED_BUF_D     = $9C00
	!addr SHARED_BUF_E     = $9E00

	; BAM cache for floppy drives; 2 KB (4 blocks) each, to cover up to ED floppies

	!addr F0_BAM_CACHE     = $A000 ; - floppy disk 0 BAM
	!addr SHARED_BUF_X0    = $A200 ; - buffer which can be used if disk is not ED 
	!addr F1_BAM_CACHE     = $A400 ; - floppy disk 1 BAM
	!addr SHARED_BUF_X1    = $A600 ; - buffer which can be used if disk is not ED

	; Memory shadow, needed for SD card support

	!addr MEMSHADOW_BUF    = $A800 ; 256 byte buffer for preserving original memory content

	; Command/filename buffers, 256 bytes each

	!addr SD_CMDFN_BUF     = $A900 ; - SD card
	!addr F0_CMDFN_BUF     = $AA00 ; - floppy 0
	!addr F1_CMDFN_BUF     = $AB00 ; - floppy 1
	!addr RD_CMDFN_BUF     = $AD00 ; - ram disk

	; Directory entry buffers, in BASIC format, $30 bytes each

	!addr XX_DIRENT_BUF    = $AE00
	!addr SD_DIRENT_BUF    = $AE00 ; - SD card
	!addr F0_DIRENT_BUF    = $AE30 ; - floppy 0
	!addr F1_DIRENT_BUF    = $AE60 ; - floppy 1
	!addr RD_DIRENT_BUF    = $AE90 ; - ram disk

	; Status buffers, content terminated by 0, $30 bytes each

	!addr XX_STATUS_BUF    = $AEC0
	!addr SD_STATUS_BUF    = $AEC0 ; - SD card
	!addr F0_STATUS_BUF    = $AEF0 ; - floppy 0
	!addr F1_STATUS_BUF    = $AF20 ; - floppy 1
	!addr RD_STATUS_BUF    = $AF50 ; - ram disk

	; Shared buffer metadata tables, 18 bytes each

	!addr BUFTAB_UNIT      = $AF50 ; which unit the buffer is assigned to
	!addr BUFTAB_DEV       = $AF62 ; which device within the unit
	!addr BUFTAB_TRACK     = $AF74 ; which track (or other kind of handle)
	!addr BUFTAB_SECTOR    = $AF86 ; which sector is stored in the first half of the buffer

	; Common DMA list, 15 bytes

	!addr DMAJOB_LIST      = $AF98
	!addr DMAJOB_SRC_MB    = DMAJOB_LIST+2
	!addr DMAJOB_DST_MB    = DMAJOB_LIST+4
	!addr DMAJOB_SIZE      = DMAJOB_LIST+7    ; keep $0200 here
	!addr DMAJOB_SRC_ADDR  = DMAJOB_LIST+9
	!addr DMAJOB_DST_ADDR  = DMAJOB_LIST+12

	;
	; Reserved 20 KB for floppy track buffers + some area still free
	;

	!addr XX_REMAINING     = $AFA7