16 KiB
New features
Here are the features of the Open ROMs not found in the original ROMs from the 80s (many of them are configurable during compilation):
-
improved keyboard scanning, resistant to ghosting and joystick interference (one variant even supports multi-key rollover), supports additional C128 keys
-
joystick can be used to move text cursor
-
pre-defined function keys
-
JiffyDOS and DolphinDOS protocols support
-
DOS wedge (direct mode only) -
@<drive_number>,@<command>,@$,@$<params>,@ -
turbo tape load support (as device 7, or using
←L), up to 250 blocks (can store bytes under I/O) -
improved support for tape adapters (for using regular casette players and other audio devices instead of Datasette)
-
extended
LOADcommand- start/end addresses are displayed, in the Final cartridge style
- command with just the file name tries to use the last device if it's number seems sane; otherwise uses 8
- secondary address over 255 is considered a start address
-
uses RAM under ROM and I/O: 61438 bytes free
-
cold/warm start silences multiple SID chips - all $D4xx and $D5xx addresses, configured addresses
-
warm start due to BRK prints out the instruction address
NOTE: extra features and their syntax can change in the future!
Features missing
The following ROM features are currently missing and are not planned due to space considerations:
- full tape support - VERIFY, SAVE, sequential files; tape is considered a legacy medium, so it's support is going to be limited
- mock 6551 emulation - this only complicates the RS-232 support for original ROMs, probably noone needs it
The following ROM features are currently missing:
- most BASIC commands
- BASIC variables
- BASIC expression parsing
- floating point routines
- RS-232 support
- NMI handling is incomplete
Hardware support status
Keyboard
| Driver | Status | Remarks |
|---|---|---|
| C64 | DONE | |
| C128 | DONE | |
| Mega65 | NOT DONE | code should be complete, but is not tested yet |
Screen
| Driver | Status | Remarks |
|---|---|---|
| VIC-II | PARTIAL | rework in progress |
| 80 columns, VDC | NOT DONE | |
| 80 columns, Mega65 | NOT DONE |
Tape port (LOAD only!)
- Tapuino
- Datasette
| Driver | Status | Remarks |
|---|---|---|
| normal | PARTIAL | no tape speed calibratrion, no error correction |
| turbo (250 blocks) | PARTIAL | no tape speed calibratrion |
IEC bus
- SD2IEC, petSD+, µIEC
- Pi1541, Ultimate II
- most disk drives and printers
- some hard drives
| Driver | Status | Remarks |
|---|---|---|
| standard | DONE | |
| JiffyDOS | DONE | |
| DolphinDOS | DONE | |
| CIA burst mod | NOT DONE | |
| Mega65 burst | NOT DONE |
IEEE-488 bus
- petSD+
- PET era disk drives and printers
- various scientific equipment
| Driver | Status | Remarks |
|---|---|---|
| CBM cartridge | NOT DONE |
RS-232
- modems (telephone, WiFi)
- parallel port printers
| Driver | Status | Remarks |
|---|---|---|
| UP2400 | NOT DONE | |
| UP9600 | NOT DONE | work started, not functional yet |
| ACIA 6551 | NOT DONE |
API status
Status of the various APIs and variables from the original ROMs
Low memory locations (pages 0 - 3)
For the current status of the low memory location implementation andd usage check this file. NOTE: available vector to certain routine does not mean that this routine is fully implemented!
BASIC
Official BASIC routines
| Entry | Unofficial | Name | Status | Remarks |
|---|---|---|---|---|
($0003) |
ADRAY1 |
NOT DONE | ||
($0005) |
ADRAY2 |
NOT DONE | ||
(00300) |
$E38B |
ERROR |
NOT DONE | |
(00302) |
$A483 |
MAIN |
NOT DONE | some implementation exists, but not connected here |
(00304) |
$A57C |
CHRNCH |
NOT DONE | |
(00306) |
$A71A |
QPLOP |
NOT DONE | some implementation exists, but not connected here |
(00308) |
$A7E4 |
GONE |
NOT DONE | some implementation exists, but not connected here |
(0030A) |
$AE86 |
EVAL |
NOT DONE | some implementation exists, but not connected here |
($A000) |
$E394 |
cold start | PARTIAL | |
($A002) |
$E3B7 |
warm start | PARTIAL |
Unofficial BASIC routines/locations
Not all of them - only these we want to have implemented.
| Address | Name | Status | Remarks |
|---|---|---|---|
$A004 |
revision str | DONE | |
$A408 |
REASON | NOT DONE | |
$A453 |
(unknown) | NOT DONE | |
$A533 |
LINKPRG | DONE | |
$A644 |
new | NOT DONE | |
$A659 |
set txt ptr | NOT DONE | |
$A68E |
RUNC | DONE | |
$A7AE |
NEWSTT | PARTIAL | redirected to RUN command |
$AB1E |
STROUT | DONE | |
$AD9E |
FRMEVL | NOT DONE | |
$BDCD |
LINPRT | DONE | temporary implementation |
$E3BF |
INIT | NOT DONE | |
$E422 |
INITMSG | DONE | |
$E453 |
RVECT | NOT DONE |
Kernal
Official Kernal routines
NOTE: Even the 'DONE' routines won't support features described as missing in one of the previous chapters!
| Address | Unofficial | Name | Status | Remarks |
|---|---|---|---|---|
($028F) |
KEYLOG |
DONE | ||
$FF81 |
$FF5B |
CINT |
DONE | |
$FF84 |
$FDA3 |
IOINIT |
PARTIAL | CIA initialization incomplete |
$FF87 |
$FD50 |
RAMTAS |
DONE | |
$FF8A |
$FD15 |
RESTOR |
DONE | |
$FF8D |
$FD1A |
VECTOR |
DONE | |
$FF90 |
SETMSG |
DONE | ||
$FF93 |
SECOND |
DONE | ||
$FF96 |
TKSA |
DONE | ||
$FF99 |
$FE25 |
MEMTOP |
DONE | |
$FF9C |
MEMBOT |
DONE | ||
$FF9F |
SCNKEY |
DONE | ||
$FFA2 |
SETTMO |
DONE | ||
$FFA5 |
ACPTR |
DONE | ||
$FFA8 |
CIOUT |
DONE | ||
$FFAB |
UNTLK |
DONE | ||
$FFAE |
UNLSN |
DONE | ||
$FFB1 |
LISTEN |
DONE | ||
$FFB4 |
TALK |
DONE | ||
$FFB7 |
READST |
DONE | ||
$FFBA |
SETFLS |
DONE | ||
$FFBD |
SETNAM |
DONE | ||
$FFC0 |
$F34A |
OPEN |
DONE | |
$FFC3 |
$F291 |
CLOSE |
DONE | |
$FFC6 |
$F20E |
CHKIN |
DONE | |
$FFC9 |
$F250 |
CKOUT |
DONE | |
$FFCC |
$F333 |
CLRCHN |
DONE | |
$FFCF |
$F157 |
CHRIN |
PARTIAL | no screen device support |
$FFD2 |
$F1CA |
CHROUT |
DONE | |
$FFD5 |
$F49E |
LOAD |
DONE | |
($0330) |
$F4A5 |
LOAD |
DONE | |
$FFD8 |
$F5DD |
SAVE |
DONE | |
($0332) |
$F5ED |
SAVE |
DONE | |
$FFDB |
SETTIM |
DONE | ||
$FFDE |
RDTIM |
DONE | ||
$FFE1 |
$F6ED |
STOP |
DONE | |
$FFE4 |
$F13E |
GETIN |
PARTIAL | no screen device support |
$FFE7 |
$F32F |
CLALL |
DONE | |
$FFEA |
UDTIM |
DONE | ||
$FFED |
SCREEN |
DONE | ||
$FFF0 |
$E50A |
PLOT |
DONE | |
$FFF3 |
IOBASE |
DONE | ||
($FFFA) |
NMI vec | PARTIAL | ||
($FFFC) |
$FCE2 |
RESET vec | PARTIAL | see IOINIT status |
($FFFE) |
IRQ/BRK vec | DONE |
Unofficial Kernal routines/locations
Not all of them - only these we want to have implemented.
| Address | Name | Status | Remarks |
|---|---|---|---|
$E518 |
legacy part of CINT | DONE | |
$E51B |
init screen keyboard, no VIC | DONE | |
$E544 |
clear screen | DONE | |
$E50C |
set cursor position | DONE | |
$E566 |
home cursor | DONE | |
$E56C |
set PNT and USER values | DONE | |
$E5A0 |
setup VIC II & I/O | DONE | |
$E6B6 |
advance cursor | NOT DONE | |
$E701 |
previous line | NOT DONE | |
$E716 |
screen CHROUT | NOT DONE | |
$E8DA |
color code table | DONE | |
$E8EA |
scroll logical line up | DONE | |
$E96C |
insert line on top | NOT DONE | |
$E9FF |
clear line | DONE | |
$EA31 |
default IRQ | PARTIAL | |
$EA7E |
ack CIA1 + below | DONE | |
$EA81 |
ret from IRQ/NMI | DONE | |
$F142 |
get key from buffer | DONE | |
$F646 |
IEC close | NOT DONE | |
$FD30 |
default vectors | DONE | |
$FD90 |
(unknown) | NOT DONE | |
$FE2D |
memtop set part | DONE | |
$FE47 |
default NMI | PARTIAL | |
$FE66 |
default BRK | DONE | |
$FF80 |
revision byte | DONE |