monitor command 'D' fully adapted

src/mon_m65/,aliases_mon.s

@@ -9,8 +9,7 @@
 ; ********************
 ; * Register storage *
 ; ********************
-
-!addr Bank        =  2 ; XXX remove this        
+    
 !addr Adr_Mode    =  2 ; $00 = 64K address, $80 = M65 flat address ; XXX adapt the implementation
 !addr PCH         =  3
 !addr PCL         =  4

src/mon_m65/bsmon.s

@@ -192,7 +192,7 @@ Jump_Table:
          !word Mon_Assemble     ; A  XXX to be debugged/adapted
          !word Mon_Bits         ; B  XXX to be debugged/adapted
          !word Mon_Compare      ; C  XXX to be debugged/adapted
-         !word Mon_Disassemble  ; D  XXX to be debugged/adapted
+         !word Mon_Disassemble  ; D
          !word Mon_Fill         ; F  XXX to be debugged/adapted
          !word Mon_Go           ; G  XXX to be debugged/adapted
          !word Mon_Hunt         ; H  XXX to be debugged/adapted
@@ -221,6 +221,8 @@ Mon_Exit:
 LAC_To_PC: ; XXX to be adapted
 ; ********
 
+   inc $D020 ; XXX fior debug only
+
 ; called from Mon_Set_Register, Mon_Go and Mon_JSR
 ; as the first instruction. The carry flag was set from
 ; the routine Got_LAC if an error occured.
@@ -231,12 +233,12 @@ LAC_To_PC: ; XXX to be adapted
 ; the routines FAR_JMP and FAR_JSR of the operating system
 
          BCS  @error
-         LDA  Long_AC
-         STA  Bank+2
-         LDA  Long_AC+1
-         STA  Bank+1
-         LDA  Long_AC+2
-         STA  Bank
+         ;LDA  Long_AC
+         ;STA  Bank+2
+         ;LDA  Long_AC+1
+         ;STA  Bank+1
+         ;LDA  Long_AC+2
+         ;STA  Bank
 @error   RTS
 
 ; *********
@@ -456,7 +458,7 @@ Mon_Bits:
          JMP  Main
 
 ; ***************
-Mon_Set_Register:
+Mon_Set_Register: ; XXX this needs adaptation
 ; ***************
 
          JSR  Get_LAC           ; get 1st. parameter
@@ -465,7 +467,7 @@ Mon_Set_Register:
 @loop    JSR  Get_LAC
          BCS  @exit
          LDA  Long_AC
-         STA  Bank,Y
+         STA  Adr_Mode,Y
          INY
          CPY  #9
          BCC  @loop

src/mon_m65/mon_command_disassemble.s

@@ -3,7 +3,6 @@
 
 Mon_Disassemble:
 
-	lda  Adr_Mode
 	pha                      ; store addressing mode, in case no parameter is given
 	lda  #$00
 	sta  Adr_Mode            ; by default use C64-style addressing
@@ -13,25 +12,24 @@ Mon_Disassemble:
 	pla                      ; drop previous addressing mode
 	jsr  LAC_To_LPC          ; Long_PC = start address
 	jsr  Get_Addr_To_LAC     ; get 2nd parameter (end address)
-	bne  @range
+	beq  @norange
+	jsr  LAC_Minus_LPC       ; Long_CT = range
+	+bcc Mon_Error           ; -> negative
+    bra  @loop
 
 @nopar:
 
 	pla                      ; retrieve old addressing mode
 	sta  Adr_Mode
 
+@norange:
+
 	lda  #$20                ; by default disassemble 32 addresses
     sta  Long_CT+0
     lda  #$00
     sta  Long_CT+1
     sta  Long_CT+2
     sta  Long_CT+3
-    bra  @loop
-
-@range:
-
-	jsr  LAC_Minus_LPC       ; Long_CT = range
-	+bcc Mon_Error           ; -> negative
 
 @loop:
 
@@ -47,4 +45,5 @@ Mon_Disassemble:
 	sbc  Op_Size
 	sta  Long_CT
 	bcs  @loop
+
 	jmp  Main