small DOS Wedge improvement

STATUS.md

@@ -9,7 +9,7 @@ Here are the features of the Open ROMs not found in the original ROMs from the 8
 * pre-defined function keys
 
 * JiffyDOS and DolphinDOS protocols support
-* DOS wedge (direct mode only) - `@<drive_number>`, `@<command>`, `@$`, `@$<params>`, `@`
+* DOS wedge (direct mode only) - `@<unit_number>`, `@<command>`, `@$[mask]`, `@<unit_number>$`, `@<unit_number>$[mask]` `@`
 * BASIC extensions, see the [documentation](doc/Extended-BASIC.md) 
 * extended / tweaked `LOAD` / `VERIFY` commands
     * start/end addresses are displayed, in the Final cartridge style

doc/Extended-BASIC.md

@@ -9,19 +9,23 @@ The DOS Wedge commands are only available in direct mode, and they have to start
 
 ### `@` (all)
 
-Displays the error/status read from the current drive. Current drive is either the last device used by any I/O command, the one set by DOS Wedge command, or 8 as a fallback.
+Displays the error/status read from the current unit. Current unit is either the last device used by any I/O command, the one set by DOS Wedge command, or a default one for the given build.
 
-### `@$` (all)
+### `@$[mask]` (all)
 
-Displays the directory of the current drive. Does not destroy BASIC program in memory.
+Displays the directory of the current unit. Can be followed by mask, like in `LOAD "$mask"`. Does not destroy BASIC program in memory.
 
-### `@device_number` (all)
+### `@<unit_number>` (all)
 
-Changes the current drive number.
+Changes the current unit number.
+
+### `@<unit_number>$[mask]` (all)
+
+Combines the two above - displays the directory of the selected driove, in one command.
 
 ### `@command` (all)
 
-Sends the DOS command to the current drive.
+Sends the DOS command to the current unit.
 
 ## Tape Wedge
 

src/basic/wedge/wedge_dos.s

@@ -136,22 +136,27 @@ wedge_dos_command_confirmed:
 
 wedge_dos_change_drive:
 
-	; Fetch new drive number, make sure this is the last part of the command
+	; Fetch new drive number, make sure it is sane
 
 	jsr fetch_uint8
-	pha
-	jsr fetch_character_skip_spaces
-	cmp #$00
-	+bne do_SYNTAX_error
-	pla
-
-	; Check if device number is valid for IEC drive
-
 	cmp #$08
 	+bcc do_ILLEGAL_DEVICE_NUMBER_error
 
+	; Check if this is end of command, or directory request
+
+	pha
+	jsr fetch_character_skip_spaces
+	cmp #$24
+	beq wedge_dos_change_drive_directory
+
+	; Make sure this is end of command
+
+	cmp #$00
+	+bne do_SYNTAX_error
+
 	; Store new device number and return to shell
 
+	pla
 	sta FA
 	jmp shell_main_loop
 
@@ -245,6 +250,17 @@ wedge_dos_status_print_no_new_line:
 
 	+bra wedge_dos_clean_exit
 
+wedge_dos_change_drive_directory:
+
+	; Store new device number, display directory
+
+	pla
+	sta FA
+
+	dec TXTPTR+0                                 ; in direct mode we do not have to care about TXTPTR+1
+
+	; FALLTROUGH
+
 wedge_dos_directory:
 
 	; First change the secondary address to the one suitable for directory loading