one more cleanup in aliases

c64/aliases/,aliases_ram_lowmem.s

@@ -39,7 +39,7 @@
 	.label STREND    = $31 // $31-$32  -- NOT IMPLEMENTED --
 	.label FRETOP    = $33 // $33-$34  -- NOT IMPLEMENTED --
 	.label FRESPC    = $35 // $35-$36  [!] our implementation might be different  XXX give more details
-	// .label MEMSIZ    = $37 // $37-$38  -- NOT IMPLEMENTED -- highest address of BASIC memory XXX remove name conflict
+	.label MEMSIZ    = $37 // $37-$38  -- NOT IMPLEMENTED -- highest address of BASIC memory
 	.label CURLIN    = $39 // $39-$3A  current BASIC line number
 	.label OLDLIN    = $3B // $3B-$3C  previous BASIC line number
 	.label OLDTXT    = $3D // $3D-$3E  current BASIC line pointer
@@ -75,7 +75,7 @@
 	.label IOSTATUS  = $90
 	.label STKEY     = $91  //          Keys down clears bits. STOP - bit 7, C= - bit 6, SPACE - bit 4, CTRL - bit 2
 	.label SVXT      = $92  //          -- NOT IMPLEMENTED --
-	.label VERCK     = $93  //          0 = LOAD, 1 = VERIFY    XXX rename to VERCKK
+	.label VERCKK    = $93  //          0 = LOAD, 1 = VERIFY
 	.label C3PO      = $94  //          flag - is BSOUR content valid
 	.label BSOUR     = $95  //          serial bus buffered output byte
 	.label SYNO      = $96  //          -- NOT IMPLEMENTED --
@@ -88,9 +88,9 @@
 	.label MSGFLG    = $9D  //          bit 6 = error messages, bit 7 = control message
 	.label PTR1      = $9E  //          -- NOT IMPLEMENTED --
 	.label PTR2      = $9F  //          -- NOT IMPLEMENTED --
-	.label TIME      = $A0  // $A0-$A2, jiffy clock
-	.label IEC_TMP1  = $A3  //          temporary variable for tape and IEC, [!] our usage probably differs in details   XXX rename to TSFCNT
-	.label IEC_TMP2  = $A4  //          temporary variable for tape and IEC, [!] our usage probably differs in details   XXX rename to TBTCNT
+	.label TIME      = $A0  // $A0-$A2  jiffy clock
+	.label TSFCNT    = $A3  //          temporary variable for tape and IEC, [!] our usage probably differs in details
+	.label TBTCNT    = $A4  //          temporary variable for tape and IEC, [!] our usage probably differs in details
 	.label CNTDN     = $A5  //          -- NOT IMPLEMENTED --
 	.label BUFPNT    = $A6  //          -- NOT IMPLEMENTED --
 	.label INBIT     = $A7  //          -- NOT IMPLEMENTED --
@@ -100,7 +100,7 @@
 	.label RIPRTY    = $AB  //          -- NOT IMPLEMENTED --
 	.label SAL       = $AC  // $AC-$AD  -- NOT IMPLEMENTED -- (implemented screen part)
 	.label EAL       = $AE  // $AE-$AF  -- NOT IMPLEMENTED -- [!] used also byy screen editor
-	.label CMP0      = $B0  // $B0-$B1, temporary tape storage, [!] here used for BRK instruction address
+	.label CMP0      = $B0  // $B0-$B1  temporary tape storage, [!] here used for BRK instruction address
 	.label TAPE1     = $B2  // $B2-$B3  tape buffer pointer
 	.label BITTS     = $B4  //          -- NOT IMPLEMENTED --
 	.label NXTBIT    = $B5  //          -- NOT IMPLEMENTED --
@@ -109,13 +109,13 @@
 	.label LA        = $B8  //          current logical_file number
 	.label SA        = $B9  //          current secondary address
 	.label FA        = $BA  //          current device number
-	.label FNADDR    = $BB  // $BB-$BC, current file name pointer
+	.label FNADDR    = $BB  // $BB-$BC  current file name pointer
 	.label ROPRTY    = $BD  //          -- NOT IMPLEMENTED --
 	.label FSBLK     = $BE  //          -- NOT IMPLEMENTED --
 	.label MYCH      = $BF  //          -- NOT IMPLEMENTED --
 	.label CAS1      = $C0  //          -- NOT IMPLEMENTED --
-	.label STAL      = $C1  // $C1-$C2, LOAD/SAVE start address
-	.label MEMUS     = $C3  // $C3-$C4, temporary address for tape LOAD/SAVE    XXX rename to MEMUSS
+	.label STAL      = $C1  // $C1-$C2  LOAD/SAVE start address
+	.label MEMUSS    = $C3  // $C3-$C4  temporary address for tape LOAD/SAVE
 	.label LSTX      = $C5  //          last keyy matrix position [!] our usage probably differs in details
 	.label NDX       = $C6  //          number of chars in keyboard buffer
 	.label RVS       = $C7  //          flag, whether to print reversed characters
@@ -157,9 +157,9 @@
 	.label LAT       = $259  // $259-$262, logical file numbers (table, 10 bytes)
 	.label FAT       = $263  // $263-$26C, device numbers       (table, 10 bytes)
 	.label SAT       = $26D  // $26D-$276, secondary addresses  (table, 10 bytes)
-	.label KEYD      = $277  // $277-$280  keyboard buffer
-	.label MEMSTR    = $281  // $281-$282  XXX rename to LORAM
-	.label MEMSIZ    = $283  // $283-$284, NOTE: Mapping the 64 erroneously has the hex as $282, while the DEC is correct XXX rename to HIRAM
+	.label KEYD      = $277  // $277-$280, keyboard buffer
+	.label MEMSTR    = $281  // $281-$282, start of BASIC memory
+	.label MEMEND    = $283  // $283-$284, NOTE: Mapping the 64 erroneously has the hex as $282 (DEC is correct), name seems to be mistaken too
 	.label TIMOUT    = $285  //            IEEE-488 timeout
 	.label COLOR     = $286  //            current text foreground color
 	.label GDCOL     = $287  //            color of character under cursor
@@ -189,7 +189,7 @@
 	.label TRDTMP    = $2A3  //            -- NOT IMPLEMENTED --
 	.label TD1IRQ    = $2A4  //            -- NOT IMPLEMENTED --
 	.label TLNIDX    = $2A5  //            -- NOT IMPLEMENTED --
-	.label PALNTSC   = $2A6  //            0 = NTSC, 1 = PAL   XXX rename to TVSFLG
+	.label TVSFLG    = $2A6  //            0 = NTSC, 1 = PAL
 	// [!] XXX document $2A7-$2FF usage
 
 	// BASIC vectors

c64/basic/,aliases.s

@@ -90,8 +90,6 @@
 	.label screen_line_link_table = $D9
 	.label current_screen_line_colour_ptr = $F3
 	.label keyboard_decoding_table_ptr = $F5
-	.label rs232_rx_buffer_ptr = $F7
-	.label rs232_tx_buffer_ptr = $F9
 
 	.label basic_input_buffer = BUF
 

c64/basic/basic_cold_start.s

@@ -19,7 +19,7 @@ startup_banner:
 
 	// Print PAL/NTSC
 	ldx #30 // NTSC
-	lda PALNTSC
+	lda TVSFLG
 	beq !+
 	ldx #31 // PAL
 !:

c64/kernal/,aliases.s

@@ -41,8 +41,6 @@
 	.label screen_line_link_table = $D9
 	.label current_screen_line_colour_ptr = $F3
 	.label keyboard_decoding_table_ptr = $F5
-	.label rs232_rx_buffer_ptr = $F7
-	.label rs232_tx_buffer_ptr = $F9
 	
 	// "Compute's Mapping the 64" book
 	.label keyboard_buffer = $0277

c64/kernal/cint_real.s

@@ -54,7 +54,7 @@ cint_pal:
 
 	lda #$01
 !:
-	sta PALNTSC
+	sta TVSFLG
 
 cint_brk: // entry for BRK and STOP+RESTORE - XXX, where should it start?
 

c64/kernal/close_load.s

@@ -13,7 +13,7 @@ close_load:
 	jsr LISTEN
 
 	lda #$E0 // CLOSE command
-	sta IEC_TMP2
+	sta TBTCNT
 	jsr iec_tx_command
 	jsr iec_tx_command_finalize
 

c64/kernal/f291.close.s

@@ -34,7 +34,7 @@ CLOSE:
 	jmp close_remove_from_table
 !:
 	ora $E0 // CLOSE command
-	sta IEC_TMP2
+	sta TBTCNT
 	jsr iec_tx_command
 	bcs close_remove_from_table
 	jsr iec_tx_command_finalize

c64/kernal/f4a5.load.s

@@ -1,4 +1,3 @@
-
 //
 // Official Kernal routine, described in:
 //
@@ -23,7 +22,7 @@
 LOAD:
 
 	// Are we loading or verifying?
-	sta VERCK
+	sta VERCKK
 
 	// Store start address of LOAD
 	stx STAL+0
@@ -82,7 +81,7 @@ LOAD:
 	jmp lvs_load_verify_error // XXX deduplicate with other jumps in this routine 
 !:
 	lda #$60 // open channel / data (p3) , required according to p13
-	sta IEC_TMP2
+	sta TBTCNT
 	jsr iec_tx_command
 	bcc !+
 	jmp lvs_load_verify_error // XXX deduplicate with other jumps in this routine 

c64/kernal/fd15.vector.s

@@ -21,7 +21,7 @@ VECTOR:
 	// Temporary storage location - checked on real C64 that this is the
 	// address originally used; after calling VECTOR and checking zero page
 	// area afterwards, the address could be found there
-	.label _caller_arr_ptr = MEMUS
+	.label _caller_arr_ptr = MEMUSS
 
 	// According to 'Compute's Mapping the Commodore 64' page 237,
 	// the CBM implementation does not disable IRQs - yet, the

c64/kernal/iec/iec_cmd_open.s

@@ -18,7 +18,7 @@ iec_cmd_open: // similar to TKSA, but without turnaround
 
 common_open_close_unlsn_second: // common part of several commands
 
-	sta IEC_TMP2
+	sta TBTCNT
 	jsr iec_tx_command
 	bcs !+ // branch if error
 	jmp iec_tx_command_finalize

c64/kernal/iec/iec_rx_byte.s

@@ -135,12 +135,12 @@ iec_rx_clk_wait2:
 	plp
 	
 	// Restore registers
-	sta IEC_TMP2 // $A4 is a byte buffer according to http://sta.c64.org/cbm64mem.html
+	sta TBTCNT // $A4 is a byte buffer according to http://sta.c64.org/cbm64mem.html
 	pla
 	tay
 	pla
 	tax
-	lda IEC_TMP2
+	lda TBTCNT
 
 	clc
 	rts

c64/kernal/iec/iec_tx_byte.s

@@ -1,7 +1,7 @@
 
 // Implemented based on https://www.pagetable.com/?p=1135, https://github.com/mist64/cbmbus_doc
 
-// Expects byte to send in IEC_TMP2 ($A4 is a byte buffer according to http://sta.c64.org/cbm64mem.html)
+// Expects byte to send in TBTCNT ($A4 is a byte buffer according to http://sta.c64.org/cbm64mem.html)
 // Carry flag set = signal EOI
 //
 // Preserves .X and .Y registers
@@ -53,9 +53,9 @@ iec_tx_common:
 
 iec_tx_common_sendbit:
 	// Is next bit 0 or 1?
-	lda IEC_TMP2
+	lda TBTCNT
 	lsr
-	sta IEC_TMP2
+	sta TBTCNT
 	bcs !+
 
 	// Bit is 0

c64/kernal/iec/iec_tx_command.s

@@ -1,7 +1,7 @@
 
 // Implemented based on https://www.pagetable.com/?p=1135, https://github.com/mist64/cbmbus_doc
 
-// Expects byte to send in IEC_TMP2 ($A4 is a byte buffer according to http://sta.c64.org/cbm64mem.html)
+// Expects byte to send in TBTCNT ($A4 is a byte buffer according to http://sta.c64.org/cbm64mem.html)
 // Carry flag set = signal EOI
 //
 // Preserves .X and .Y registers

c64/kernal/lvs_helpers.s

@@ -18,7 +18,7 @@ lvs_send_file_name_loop:
 	sec
 !:
 	// Transmit one character
-	sta IEC_TMP2
+	sta TBTCNT
 	jsr iec_tx_byte
 	jmp lvs_send_file_name_loop
 lvs_send_file_name_done:
@@ -86,7 +86,7 @@ lvs_display_loading_verifying:
 	// Display LOADING / VERIFYING and start address
 	lda MSGFLG
 	bpl lvs_display_end
-	lda VERCK
+	lda VERCKK
 	beq !+
 	jsr printf // XXX don't use printf, use packed message
 	.byte $0D
@@ -156,7 +156,7 @@ lvs_illegal_device_number:
 
 lvs_load_verify_error:
 	// XXX should we really return BASIC error code here?
-	lda VERCK
+	lda VERCKK
 	bne lvs_verify_error
 	lda #B_ERR_LOAD
 	bne lvs_error_end

c64/kernal/memtop.s

@@ -12,13 +12,13 @@ MEMTOP:
 
 	bcc memtop_set
 	
-	ldy MEMSIZ+1
-	ldx MEMSIZ+0
+	ldy MEMEND+1
+	ldx MEMEND+0
 	rts
 
 memtop_set:
 
-	sty MEMSIZ+1
-	stx MEMSIZ+0
+	sty MEMEND+1
+	stx MEMEND+0
 	
 	rts

c64/kernal/ramtas.s

@@ -61,14 +61,14 @@ ramtas_l2:
 	ldx #>$0400
 	stx HIBASE
 	
-	//  Work out RAM size and put in MEMSTR and MEMSIZ
+	//  Work out RAM size and put in MEMSTR and MEMEND
 	// "Compute's Mapping the 64", p54
 	//  http://unusedino.de/ec64/technical/project64/mapping_c64.html
 	ldx #>$0800
 	stx MEMSTR+1
 	ldx #$00
 	stx MEMSTR+0
-	stx MEMSIZ+0
+	stx MEMEND+0
 	// Try to modify $8000, if it fails then RAM ends at $7FFF, else $9FFF
 	lda $8000
 	eor #$FF
@@ -79,12 +79,12 @@ ramtas_l2:
 	beq ramtas_32K_RAM
 	sta $8000
 	ldx #$A0
-	stx MEMSIZ+1
+	stx MEMEND+1
 	jmp ramtas_RAM_sized
 ramtas_32K_RAM:	
 	sta $8000 		// in case RAM is hiding beneath a ROM
 	ldx #$80
-	stx MEMSIZ+1
+	stx MEMEND+1
 	// Fall through
 ramtas_RAM_sized:	
 	

c64/kernal/talk.s

@@ -26,7 +26,7 @@ TALK:
 
 common_talk_listen: // common part of TALK and LISTEN
 
-	sta IEC_TMP2
+	sta TBTCNT
 	jmp iec_tx_command
 
 

c64/kernal/untlk.s

@@ -21,7 +21,7 @@ UNTLK:
 
 common_untlk_tksa: // common part of UNTLK and TKSA
 
-	sta IEC_TMP2
+	sta TBTCNT
 	jsr iec_tx_command
 	bcs !+ // branch if error
 	// XXX - for TKSA, is it really the right place to do a turnaround? I've got some doubts