ARNITECH_CONTROLLER is on in mc64 and mc64blade, so the headers of the
controller's, the TOD's, and the network's code, the jump table's, and
CONFIG.md no longer say mc64 only.
Version 2 of the Arnitech jump table, with 6 entries: whole Ethernet frames
through the CS8900A at the RR-Net socket (arnitech's ADR 0027), found by its
Product ID and polled, from the CS8900A datasheet's PacketPage registers and
its 8-bit mode. NET_INIT resets the chip and turns on receiving its own and
broadcast frames and sending; NET_MAC copies the Individual Address; NET_SEND
bids and writes a frame; NET_RECV copies the oldest frame received, or drops
one longer than the buffer with Skip_1. Carry is the result, with an error
code in A, and the pointer and count go in SAL and EAL.
A new option, ARNITECH_CONTROLLER, on in the mc64 configuration only.
IOINIT starts timer A with CIA #1's TOD on 50 Hz, the mc64's mains, and
if the Arnitech controller's signature "ARNI" is at $DE80, latches its
clock and copies its real time into the TOD, hours first and tenths
last, flipping bit 7 of an hour of 12 first, since the CIA flips it
back when 12 is written. Without the signature the TOD is left alone.
The Arnitech jump table at $FF00: "ARNI", version $01, two entries, and
JMPs from $FF06: $FF06 finds the first Card slot holding a Card of the
type in A (carry clear, the slot in A, its Card window's low byte in
X; carry set if none or no controller), $FF09 sets the TOD as IOINIT
does. $FF48-$FF80 stay clear. The code is in new files under
src/kernal/arnitech; other configurations build as before.
chris